|2000-2001 Handbook Contents...||UMSL Govt. Docs...||UMSL Libraries...||UMSL Home...|
Nature of the Work | Working Conditions | Employment | Training, Other Qualifications, and Advancement | Job Outlook | Earnings | Related Occupations | Sources of Additional Information
Carpenters are involved in many different kinds of construction activity. They cut, fit, and assemble wood and other materials in the construction of buildings, highways, bridges, docks, industrial plants, boats, and many other structures. Carpenters duties vary by type of employer. Builders increasingly are using specialty trade contractors who, in turn, hire carpenters who specialize in just one or two activities. Some of these activities are setting forms for concrete construction; erecting scaffolding; or doing finishing work, such as installing interior and exterior trim. However, a carpenter directly employed by a general building contractor often must perform a variety of the tasks associated with new construction, such as framing walls and partitions, putting in doors and windows, building stairs, laying hardwood floors, and hanging kitchen cabinets.
Because local building codes often dictate where certain materials can be used, carpenters must know these requirements. Each carpentry task is somewhat different, but most involve the same basic steps. Working from blueprints or instructions from supervisors, carpenters first do the layoutmeasuring, marking, and arranging materials. They cut and shape wood, plastic, fiberglass, or drywall, using hand and power tools, such as chisels, planes, saws, drills, and sanders. They then join the materials with nails, screws, staples, or adhesives. In the final step, carpenters check the accuracy of their work with levels, rules, plumb bobs, and framing squares and make any necessary adjustments. When working with prefabricated components, such as stairs or wall panels, the carpenters task is somewhat simpler than above, because it does not require as much layout work or the cutting and assembly of as many pieces. Prefabricated components are designed for easy and fast installation and generally can be installed in a single operation.
Carpenters who remodel homes and other structures must be able to do all aspects of a joband not just one task. Thus, individuals with good basic overall training are at a distinct advantage, because they can switch from residential building to commercial construction or remodeling work, depending on which offers the best work opportunities.
Carpenters employed outside the construction industry perform a variety of installation and maintenance work. They may replace panes of glass, ceiling tiles, and doors, as well as repair desks, cabinets, and other furniture. Depending on the employer, carpenters install partitions, doors, and windows; change locks; and repair broken furniture. In manufacturing firms, carpenters may assist in moving or installing machinery. (For more information on workers who install machinery, see the sections on industrial machinery repairers and millwrights elsewhere in the Handbook.)
As in other building trades, carpentry work is sometimes strenuous. Prolonged standing, climbing, bending, and kneeling are often necessary. Carpenters risk injury working with sharp or rough materials, using sharp tools and power equipment, and from slips or falls. Additionally, many carpenters work outdoors, which can be uncomfortable.
Some carpenters change employers each time they finish a construction job. Others alternate between working for a contractor and working as contractors themselves on small jobs.
Carpenters, the largest group of building trades workers, held about 1.1 million jobs in 1998. Nearly 4 of every 5 worked for contractors who build, remodel, or repair buildings and other structures. Most of the remainder worked for manufacturing firms, government agencies, wholesale and retail establishments, or schools. Nearly one-third were self-employed.
Carpenters are employed throughout the country in almost every community.
Carpenters learn their trade through on-the-job training, as well as formal training programs. Most pick up skills informally by working under the supervision of experienced workers. Many acquire skills through vocational education. Others participate in employer training programs or apprenticeships.
Most employers recommend an apprenticeship as the best way to learn carpentry. Apprenticeship programs are administered by local joint union-management committees of the United Brotherhood of Carpenters and Joiners of America, the Associated General Contractors, Inc., and the National Association of Home Builders. In addition, training programs are administered by local chapters of the Associated Builders and Contractors and by local chapters of the Associated General Contractors, Inc. These programs combine on-the-job training with related classroom instruction.
On the job, apprentices learn elementary structural design and become familiar with common carpentry jobs, such as layout, form building, rough framing, and outside and inside finishing. They also learn to use the tools, machines, equipment, and materials of the trade. Apprentices receive classroom instruction in safety, first aid, blueprint reading, freehand sketching, basic mathematics, and different carpentry techniques. Both in the classroom and on the job, they learn the relationship between carpentry and the other building trades.
Usually, apprenticeship applicants must be at least 17 years old and meet local requirements. For example, some union locals test an applicants aptitude for carpentry. The length of the program, usually about 3 to 4 years, varies with the apprentices skill. Because the number of apprenticeship programs is limited, however, only a small proportion of carpenters learn their trade through these programs.
Informal on-the-job training is normally less thorough than an apprenticeship. The degree of training and supervision often depends on the size of the employing firm. A small contractor specializing in home-building may only provide training in rough framing. In contrast, a large general contractor may provide training in several carpentry skills. Although specialization is becoming increasingly common, it is important to try to acquire skills in all aspects of carpentry and to have the flexibility to perform any kind of work.
A high school education is desirable, including courses in carpentry, shop, mechanical drawing, and general mathematics. Manual dexterity, eye-hand coordination, physical fitness, and a good sense of balance are important. The ability to solve arithmetic problems quickly and accurately is also helpful. Employers and apprenticeship committees generally view favorably any training and work experience obtained in the Armed Services or Job Corps.
Carpenters may advance to carpentry supervisors or general construction supervisors. Carpenters usually have greater opportunities than most other construction workers to become general construction supervisors, because carpenters are exposed to the entire construction process. Some carpenters become independent contractors. To advance, these workers should be able to estimate the nature and quantity of materials needed to properly complete a job. In addition, they must be able to estimate, with accuracy, how long a job should take to complete and its cost.
Job opportunities for carpenters are expected to be plentiful through the year 2008, due primarily to extensive replacement needs. Thousands of job openings will become available each year as carpenters transfer to other occupations or leave the labor force. The total number of job openings for carpenters is usually greater than for other craft occupations, because the carpentry occupation is large and the turnover rate is high. Because there are no strict training requirements for entry, many people with limited skills take jobs as carpenters but eventually leave the occupation because they dislike the work or cannot find steady employment. However, employment of carpenters is expected to increase more slowly than the average for all occupations through the year 2008.
Increased demand for carpenters will create additional job openings. Construction activity should increase slowly, in response to demand for new housing and commercial and industrial plants and the need to renovate and modernize existing structures. Opportunities for frame carpenters should be particularly good.
However, the demand for carpenters will be offset somewhat by expected productivity gains resulting from the increasing use of prefabricated components, such as prehung doors and windows and prefabricated wall panels and stairs, which can be installed very quickly. Prefabricated walls, partitions, and stairs can be lifted into place in one operation; beamsand in some cases entire roof assembliescan be lifted into place using a crane. As prefabricated components become more standardized, builders may use them more often. In addition, improved adhesives will reduce the time needed to join materials, and lightweight, cordless pneumatic and combustion toolssuch as nailers and drillsand sanders with electronic speed controls will make carpenters more efficient.
Carpenters can experience periods of unemployment because of the short-term nature of many construction projects and the cyclical nature of the construction industry. Building activity depends on many factorsinterest rates, availability of mortgage funds, government spending, and business investmentthat vary with the state of the economy. During economic downturns, the number of job openings for carpenters declines. New and improved tools, equipment, techniques, and materials have vastly increased carpenter versatility. Therefore, carpenters with all-round skills will have better opportunities than those who can only do a few relatively simple, routine tasks.
Job opportunities for carpenters also vary by geographic area. Construction activity parallels the movement of people and businesses and reflects differences in local economic conditions. Therefore, the number of job opportunities and apprenticeship opportunities in a given year may vary widely from area to area.
In 1998, median hourly earnings of carpenters were $13.82. The middle 50 percent earned between $10.84 and $18.57. The lowest 10 percent earned less than $8.74 and the highest 10 percent earned more than $23.57. Median hourly earnings in the industries employing the largest numbers of carpenters in 1997 are shown below:
Earnings can be reduced on occasion, because carpenters lose work time in bad weather and during recessions when jobs are unavailable.
In 1998, median hourly earnings of ceiling tile installers and acoustical carpenters were $15.27. The middle 50 percent earned between $11.88 and $20.50. The lowest 10 percent earned less than $9.68 and the highest 10 percent earned more than $29.57.
Some carpenters are members of the United Brotherhood of Carpenters and Joiners of America.
Carpenters are skilled construction workers. Workers in other skilled construction occupations include bricklayers, cement masons, concrete finishers, electricians, pipefitters, plasterers, plumbers, stonemasons, and terrazzo workers.
For information about carpentry apprenticeships or other work opportunities in this trade, contact local carpentry contractors, locals of the union mentioned above, local joint union-contractor apprenticeship committees, or the nearest office of the State employment service or State apprenticeship agency.
For general information about carpentry, contact:
An industry employing carpenters that appears in the 2000-01 Career Guide to Industries: Construction
Last Updated: March 30, 2000
|2000-2001 Handbook Contents...||UMSL Govt. Docs...||UMSL Libraries...||UMSL Home...|