Joint Undergraduate Engineering Program Home Page
Administration
Joseph A. O'Sullivan, Dean
Ph.D., University of Notre Dame
Bernard J. Feldman, Associate Dean
Ph.D., Harvard University
Mary McManus, Assistant Director of Student Services
M.Ed., University of Missouri-St. Louis
Faculty
Kurt C. Amuedo, Adjunct Professor
M.E., Washington University
Carl A. Baggett, Adjunct Professor and Advisor
M.S., University of Missouri-Rolla
Stephen W. Bannes, Adjunct Professor
M.S., Southwest Baptist University
Philip V. Bayly, Professor
Ph.D., Duke University
Philip J. Beck, Adjunct Professor
M.S., Washington University
Warren Bergquist, Adjunct Professor
M.S., Washington University
Kenneth Berry, Adjunct Professor
M.S., Virginia Tech
Thomas L Bever, Adjunct Professor
B.S., Washington University
Harold J. Brandon, Affiliate Professor
D.Sc., Washington University
Thomas Bush, Adjunct Professor and Advisor
D.Sc., University of Kansas
Ying Xia Cai, Adjunct Professor
Ph.D., Washington University
Thomas P. Collins, Adjunct Professor
M.S., Washington University
Gary Crawford, Adjunct Professor
M.S. Fontbonne University
William K. Dick, Adjunct Professor
M.E.E., University of Missouri – Columbia
Issam M. El Naqa, Adjunct Professor
Ph.D., Illinois Institute of Technology
Phillip L. Gould, Professor
Ph.D., Northwestern University
Paul Groszewski, Professor and Advisor
M.S., Washington University
Raimo J. Hakkinen, Professor
Ph.D., California Institute of Technology
Thomas G. Harmon, Professor
Ph.D., Massachusetts Institute of Technology
John Harris, Adjunct Professor
M.S., Washington University
Kenneth Jerina, Professor
D.Sc., Washington University
Alan B. Johnston, Adjunct Professor
Ph.D., Lehigh University
Thomas P. Jolley, Adjunct Professor
B.S., University of Missouri – Columbia
William S. Kankolenski, P.L.S., Adjunct Professor
B.S., Ferris State University
I. Norman Katz, Professor
Ph.D., Massachusetts Institute of Technology
Kenneth E. Krause, Adjunct Professor
Ph.D., Washington University
David A. Kuefler, Adjunct Professor
M.S., Washington University
Shawn Leight, Adjunct Professor
M.S., University of Wisconsin at Madison
Dwight C. Look, Jr., Adjunct Professor
Ph.D., University of Oklahoma
Gholam H. Masoumy, Adjunct Professor
Ph.D., Washington University
Gregory L. Mayhew, Adjunct Professor
Ph.D., University of Southern California
Clayton T. Miller, Adjunct Professor
Ph.D., Washington University
Gary Moore, Adjunct Professor
M.S., University of Missouri – Rolla
Paul John Nauert, Adjunct Professor
M.S., Purdue University
Arye Nehorai, Professor
Ph.D., Stanford University
Sebastian Nervi, Adjunct Professor
Ph..D., Washington University
Emir Osmanagic, Adjunct Professor
M.S., Washington University
David A. Peters, Professor
Ph.D., Stanford University
Robert J. Rauschenbach, Adjunct Professor
M.S., University of Missouri - Rolla
Daniel L. Rode, Professor
Ph.D., Case Western Reserve University
Shankar M. L. Sastry, Professor
Ph.D., University of Toronto
Joseph L. Schwenk, Adjunct Professor
M.S., University of Missouri - Rolla
Barry E. Spielman, Professor
Ph.D., Syracuse University
Karl Spuhl, Adjunct Professor
M.S., St. Louis University
Srinivasan Sridharan, Professor
Ph.D., University of Southhampton
Jason W. Trobaugh, Adjunct Professor
Ph.D.. Washington University
Michael T. Trueblood, Adjunct Professor
M.S., University of Missouri – Rolla
Michael C. Wendl, Adjunct Professor
Ph.D., Washington University
Matthew J. Westphal, Adjunct Professor
M.S., Southern Illinois University – Edwardsville
Alan C. Wheeler, Affiliate Professor
Ph.D., Stanford University
General Information
The Joint Undergraduate Engineering Program of UMSL and Washington University was approved in 1993 by the University of Missouri and the Coordinating Board for Higher Education. The program is designed to offer course work beyond the pre-engineering courses at UMSL and the area community colleges. Pre-engineering and general education courses are offered at UMSL, and upper-level engineering courses are offered in the evenings and on Saturdays on the Washington University campus: this schedule permits students to co-op during the day at local engineering firms. Students will be admitted to the upper-division program only after they have completed an acceptable pre-engineering program. They can earn a bachelor of science in civil engineering (B.S.C.E.), a bachelor of science in electrical engineering (B.S.E.E.), or a bachelor of science in mechanical engineering (B.S.M.E.).
Mission Statement
The mission of the UMSL/WU Joint Undergraduate Engineering Program is consistent with the mission of UMSL which is to provide a high quality education leading to a well-trained, sophisticated work force primarily for the St. Louis region. The program strives to excite and nurture the intellectual, technical, professional and personal development of the students through a partnership which provides a mechanism for Washington University to share its campus, resources and personnel with the UM-St Louis students, many of whom are place-bound individuals, The Joint Program reflects the eagerness of the institutions to work in unison to serve the needs of the St. Louis community.
Educational Objectives
The aspirations of the UMSL/WU Joint Undergraduate Engineering Program are to make positive, substantive and lasting contributions to the lives of our students. In this manner, the students should be able to apply their comprehensive education within the engineering profession or an alternatively related field.
The objectives of the program are structured to impart an education that constitutes the essential ingredients for Civil, Electrical and Mechanical Engineering practice. The alumni of these programs are expected to develop professional skills that facilitate their continued career growth well beyond their graduation. The objectives also build on the fact that the typical nontraditional and traditional students in these programs often have work experience in or related to engineering practice.
The principal objectives of the UMSL/WU Joint Undergraduate Engineering Program are:
To impart an education in the Civil, Electrical and Mechanical Engineering disciplines that inspires the graduates to constantly share their knowledge with others, to continually improve their knowledge and understanding, and to persistently adapt to change in technology and world needs.
Specifically, the goals of the programs are:
- To have the ability to apply fundamental knowledge in mathematics and science in the solution of technical problems;
- To have the ability to investigate, carry out and perform all elements of the design process in the respective engineering practice;
- To understand the need for lifelong learning to remain at the forefront of technology;
- To understand the societal, health, environmental and human impact on their actions and to act in an ethical and legally responsible manner; and
- To have an appreciation for and to assimilate the qualities of professional leaders and team players such as communication, networking, and integrity.
The B.S.C.E., the B.S.E.E., and the B.S.M.E. are accredited by the Engineering Accreditation Commission of the Accreditation Board for Engineering and Technology (ABET), 111 Market Place, Suite 1050, Baltimore, MD 21202-4012 – telephone: (410) 347-7700.
Admission
Admission to candidacy for these degrees is granted jointly by the University of Missouri-St. Louis and Washington University.
Normally admission is granted to persons who have completed the pre-engineering program with a minimum grade point average of 2.75 over all mathematics, chemistry, physics, and introductory engineering courses (statics and dynamics). Students with less than a 2.75 grade point average, but at least a C in all their science and math courses, may be admitted on a probationary basis. These students must pass an Engineering Math Workshop with a grade of B or better, and then pass J E MATH 3170 Engineering Mathematics in the first year with a C- or better, in order to continue in the program.
Degree Requirements
Bachelor of Science in Civil Engineering
Bachelor
of Science in Electrical Engineering
Bachelor
of Science in Mechanical Engineering
A program of 137 semester hours is required for the Bachelor of Science in Civil Engineering, a program of 127 semester hours is required for the Bachelor of Science in Electrical Engineering, and a program of 139 semester hours is required for the Bachelor of Science in Mechanical Engineering, as shown below:
All majors must complete the University General Education requirements, the Pre-Engineering Requirements and the Core Engineering Requirements.
All students must first complete J E MATH 3170, Engineering Mathematics, with a minimum grade of C-.
Mechanical and Electrical Engineering majors must also complete J E ENGR 2300, Introduction to Electrical Networks with a minimum grade of C-.
Civil engineering majors must complete either J E ENGR 2300, Introduction to Electrical Networks, or J M ENGR 3200 Thermodynamics, with a minimum grade of C-.
A minimum grade of C- is necessary to meet the prerequisite requirement for any course.
Pre-Engineering
Requirements
MATH
1800, Analytic Geometry/Calculus I
MATH
1900, Analytic Geometry/Calculus II
MATH
2000, Analytic Geometry/Calculus III
MATH
2020, Differential Equations
CHEM 1111, Introductory Chemistry I
CHEM 1121, Introductory Chemistry II
PHYSICS 2111, Physics: Mechanics and Heat
PHYSICS 2112, Physics: Electricity, Magnetism and
Optics
ENGR 2310, Statics
ENGR
2320, Dynamics
ENGL 1100, Composition
Humanities and Social Sciences Electives
The student's choice of humanities and social sciences electives must meet both the UMSL General Education Requirements and the Humanities and Social Sciences Requirements of the Joint Undergraduate Engineering Program. Check with your adviser for details. In particular:
- Three courses in the humanities and 3 courses in social sciences must be taken
- One of the social sciences must be a course in American history or government or in Missouri history or government
- One of the humanities or social science courses must be at the junior level or above
- The cultural diversity requirement must be fulfilled.
- Some courses that fulfill the humanities [H] or social sciences [SS] breath of study requirement do not count as Humanities and Social Sciences Electives; an example would be a statistics course taught in economics or psychology. See the Office of the Joint Undergraduate Engineering Program for a listing of courses that do not count as Humanities or Social Sciences Electives in this program, or check with your advisor.
Engineering Core Requirements
J CMP SC
1002, Introduction to Computing Skills: MATLAB
Skills
CMP SCI 1250, Introduction to Computing
J E MATH 3170, Engineering
Mathematics
ENGL 3130, Technical Writing
J M ENGR 3200, Thermodynamics*
J M ENGR
4310/J E ENGR 4410, Control Systems
I*
J E ENGR 2300, Introduction to Electrical
Networks*
J E ENGR 2330, Electrical
and Electronic Circuits Laboratory *
*Required for
electrical and mechanical engineering majors only.
Civil Engineering Major Requirements
J C ENGR
2160, Surveying
J C ENGR 3410,
Structural Analysis
J C ENGR 3420,
Structural Design
J C ENGR 3520, Water and Wastewater treatment
JC ENGR 3360, Civil Engineering Materials Lab
J C ENGR
3760, Open Channel Hydraulics
J C ENGR
4190, Soil Mechanics
J C ENGR 4200,
Soil Exploration and Testing
J C ENGR 4740,
Economic Decisions in Engineering
J C ENGR
4760, Site Planning and Engineering OR
J C ENGR 4670 Structural Design Projects or
J C ENGR
4820, Design of Water Quality Control
Facilities
J C ENGR 4840, Probabilistic
Methods in Civil Engineering Design
JC ENGR, 4950, Fundamentals of Engineering Review
J C ENGR 4990, Senior Civil Engineering Seminar
J M ENGR 1413, Introduction to Engineering Design: CAD
J M ENGR
2410, Mechanics of Deformable Bodies
J M ENGR 3360, Material Science
J M ENGR 3700,
Fluid Mechanics
J M ENGR 3721, Fluid
Mechanics Laboratory
Civil Engineering Electives
J M ENGR 3200, Thermodynamics OR
J E ENGR 2300, Introduction to Electrical Networks
J C ENGR 3460, Transportation Engineering
J C ENGR 4600, Transportation Planning
J C ENGR 4640, Foundation Engineering
Electrical Engineering Major Requirements
J E MATH
3260, Probability and Statistics
for Engineering
J E ENGR
2320, Introduction to Electronic
Circuits
J E ENGR 2600, Introduction
to Digital Logic and Computer Design
J E ENGR 3300, Engineering Electromagnetic
Principles
J E ENGR 3320, Power, Energy,
and Polyphase Circuits
J E ENGR 3510,
Signals and Systems
J E ENGR 4350, Electrical
Energy Laboratory
J E ENGR 4650, Digital
Systems Laboratory
J E ENGR 4980, Electrical
Engineering Design Projects
Electrical Engineering
Electives 3000-4990
Mechanical Engineering Major Requirements
J C ENGR 4950, Fundamentals of Engineering
J E MATH
3260, Probability and Statistics
for Engineering
J M ENGR 1413, Introduction to Engineering Design: CAD
J M ENGR 1414, Introduction
to Engineering Design: Project
J M ENGR 2410,
Mechanics of Deformable Bodies
J M ENGR 3221, Mechanical
Design and Machine Elements
J M ENGR 3250, Materials
Science
J M ENGR 3700, Fluid Mechanics
J M ENGR
3710, Principles of Heat Transfer
J M ENGR
3721, Fluid Mechanics Laboratory
J M ENGR
3722, Heat Transfer Laboratory
J M ENGR 4041, Current Topics in Mechanical Engineering Design
Mechanical Engineering Electives
J M ENGR 4120, Design of Thermal Systems
J M ENGR
4170, Dynamic Response of Physical
Systems
J M ENGR 4180, Dynamic Response
Laboratory
J M ENGR 4110, Mechanical Engineering Design Project
Mechanical
Engineering Electives
Graduation Requirements
In addition to the requirements of the University of Missouri-St. Louis that apply to all candidates for undergraduate degrees, the student must earn a minimum campus grade point average of 2.0 and a minimum grade point average of 2.0 for all engineering courses attempted at the University of Missouri-St. Louis.
Engineering Design and Engineering
Science Requirements
The number of semester hours assigned to each engineering course in the Joint Undergraduate Engineering Program is further divided into hours of engineering design, engineering science, and basic science content. Engineering topics is the sum of engineering science hours and engineering design hours. The following table shows the design hours and engineering science hours for courses in the engineering programs.
Each engineering student must complete a curriculum that contains at least 48 hours of engineering topics semester hours, including all courses: pre-engineering requirements, engineering core requirements, major requirements, and electives. Civil, electrical, and mechanical engineering majors should consult with their advisers to select electives at the 3000 and 4000 level that include sufficient engineering design and engineering science content to produce the required totals. Transfer courses from other institutions do not necessarily have the same engineering science and engineering design content as their equivalents in the UMSL/Washington University Joint Undergraduate Engineering Program. Students who include transfer courses in their curricula should consult with their advisers to be sure that these requirements are met.
Fees
Students register on the UMSL campus and pay UMSL fees plus an engineering fee for both pre-engineering and engineering courses. Limits on enrollments are determined by the availability of resources.
Career Outlook
Engineering is one of the few careers in which the bachelor's degree is a professional degree. Students earning a bachelor of science degree in one of the engineering disciplines are well qualified for entry-level engineering positions in a variety of businesses, industries, consulting firms, and government agencies. As society becomes increasingly dependent on technology, the outlook for all engineering disciplines becomes increasingly bright. Engineering careers typically rank at, or very near, the top of virtually any published rating of promising jobs for the 21st Century. Besides tackling challenging technical problems, roughly two-thirds of all engineers will have some level of management responsibility within ten years of receiving their bachelor's degrees. Many practicing engineers will eventually continue their education by pursuing graduate degrees on a part-time basis. Typical areas of graduate study include all advanced technical and scientific fields and management.
For Further Information
For information about enrolling
in this program, please contact the UMSL/Washington University
Joint Undergraduate Engineering Program at 314-516-6800.